PMDF System Manager's Guide

To configure PMM to scan PMDF, it is necessary to add an entry for the PMDF scanning module to the PMM namon$server.ini file. The entry on OpenVMS should be

[Entity PMDF] Command="RUN PMDF_EXE:pmm_scanner.exe" FullName=PMDF e-mail Interconnect MaxRun=1200

Once that entry has been made, restart the NAMON$SERVER process so that the change to the file will be seen; e.g., on OpenVMS

$ @SYS$STARTUP:namon$shutdown.com $ @SYS$STARTUP:namon$startup.com

After the server has restarted, you should then be able to see PMDF appear as one of the scannable services in the PMM workstation display.