Previous | Contents | Index |
Once configured, the circuit check facility must be started up with the PMDF STARTUP CIRCUIT_CHECK
(OpenVMS) or pmdf startup circuit_check
(UNIX or NT) command. On OpenVMS, such a command should be inserted
into your system startup procedure if you want the circuit check
facility to begin running automatically after system reboots.
To restart the circuit check facility after configuration changes, use the PMDF RESTART CIRCUIT_CHECK
(OpenVMS) or pmdf restart circuit_check
(UNIX or NT) command.
To shut down the circuit check facility, use the PMDF SHUTDOWN CIRCUIT_CHECK
(OpenVMS) or pmdf shutdown circuit_check
(UNIX or NT) command.
Previous | Next | Contents | Index |