PMDF System Manager's Guide

The following two sections document how to add an addressing channel to your configuration and, if desired, how to customize the command names recognized by the channel.

26.1.3.1 Adding the Channel to the Configuration File

The first step is to pick a domain name for the addressing channel; for example, addressing.example.com. Mail to be processed by the channel should then be addressed to x@addressing.example.com. The value of x is irrelevant --- it is never used by the channel and, at present, simply discarded. After selecting a domain name, add rewrite rules for it to the top of the configuration file

addressing $U%domain-name@ADDRESSING-DAEMON domain-name $U%domain-name@ADDRESSING-DAEMON

where domain-name is the domain name selected for the addressing channel. For example, if the domain name selected is addressing.example.com, then the rewrite rule would appear as

addressing.example.com $U%addressing.example.com@ADDRESSING-DAEMON

Next, add the channel block

address ADDRESSING-DAEMON

to the end of the configuration file. Be sure to include a blank line before the first line of the channel block.

If desired, additional addressing channels can be added. They should have names beginning with "address_" and not exceed a length of 32 characters.

26.1.3.2 Option Files

If you supply an option file, then you must define all commands which are to be accepted. This is even the case if you are just supplying an option file to set some non-command related parameter. This behavior is intentional; it allows commands to be disabled.

Option files consist of several lines. Each line contains the setting for one option. An option setting has the form:

option=command-name

where the valid values for option are given in Table 26-2 and command-name is a string specifying the name of a command to establish. Synonymous commands can be established by using the same option in the options file; e.g., EMAIL in Example 26-1.

Table 26-2 Addressing Channel Options

Option	Usage
AFTER	FAX address AFTER attribute
AT	FAX & printer address AT attribute
AUTH	FAX address AUTH attribute
COVER	FAX address COVER attribute
COMMENTS	RFC 822 Comments: header line
DEFAULT_DOMAIN	Domain name to use when none specified for a FAX or printer address; by default no default domain name is established
DELIMITER	Single character used to delimit command names; e.g., the colon, :, in ":stop:"
DELRCPT	Address to which to send delivery receipts
DMN	FAX & printer domain name
EMAIL	Regular RFC 822 To: address (synonym for EMAIL_TO)
EMAIL_BCC	Regular RFC 822 Bcc: address
EMAIL_CC	Regular RFC 822 Cc: address
EMAIL_TO	Regular RFC 822 To: address
FN	FAX address FN attribute
FROM	RFC 822 From: address
FSI	FAX address FSI attribute
MIME_MODE	Control whether the addressing channel will process commands from MIME encoded message parts
MS	Printer address MS attribute
NDELRCPT	Suppress delivery receipt requests
O	FAX & printer address O attribute
OU	FAX & printer address OU attribute
P1--P8	Printer address P1--P8 attributes
PS_QUALIFIERS	RFC 822 X-PS-Qualifiers: header line
RP_MODE	Control whether the addressing channel operates in a mode compatible with parsing MIME application/remote-printing message parts
SETUP	FAX address SETUP attribute
SFN	FAX address SFN attribute
STN	FAX address STN attribute
STOP	String to recognize as a stop or end command
SUBJECT	RFC 822 Subject: header line
TN	FAX & printer address TN attribute
TTI	FAX address TTI attribute
USERNAME	Username to associate with printer channel print jobs

The example option file given in Example 26-1 establishes the default command set used by the addressing channel. A copy of this file, address_option.sample , can be found in the PMDF table directory, i.e., PMDF_TABLE:address_option.sample on OpenVMS or /pmdf/table/address_option.sample on UNIX.

Example 26-1 Example Addressing Channel Option File

! *** If you make your own option file, then you must specify _ALL_ the ! *** addressing commands which you use! ! DELIMITER=: MIME_MODE=0 RP_MODE=0 EMAIL_TO=To EMAIL_CC=Cc EMAIL_BCC=Bcc EMAIL_TO=e-mail EMAIL_TO=email EMAIL_TO=PMDF EMAIL_TO=RFC822 COMMENTS=Comments PS_QUALIFIERS=PS Qualifiers AFTER=Transmit after AT=Recipient's name AUTH=Authorization code COVER=Cover page DELRCPT=Delivery receipt DMN=FAX gateway address DMN=Printer domain name FN=FAX telephone number FROM=From FSI=FAX modem's telephone number MS=Mail stop NDELRCPT=No delivery receipt O=Recipient's organization OU=Recipient's address P1=P1 P2=P2 P3=P3 P4=P4 P5=P5 P6=P6 P7=P7 P8=P8 SETUP=Initialization file SFN=My FAX telephone number STN=My telephone number STOP=end STOP=start STOP=stop SUBJECT=Subject TN=Recipient's telephone number TTI=My organization USERNAME=Username USERNAME=User

One of the most useful options is the DEFAULT_DOMAIN option. To prevent, for instance, users from having to specify

:FAX gateway address: ps-fax

in messages, you can specify

DEFAULT_DOMAIN=ps-fax

in an option file. Remember that the existence of the option file clears all commands and you must explicitly define each command in the option file. If you want to use the default commands but specify a default domain, then simply copy the sample file, address_option.sample , to an option file with the correct name (e.g., address_option ), and then add to that file the DEFAULT_DOMAIN setting.